When Windows tries in vain to locate a key block of data in memory, PAGE_FAULT_IN_NONPAGED_AREA is used to protect your system from additional damage. The issue appears on the blue screen, often known as the Blue Screen of Death (BSOD). The data it’s looking for is stored in a page file, which could be in the system’s RAM or on the hard disc (RAM). Basically, when there is a failure in RAM, this problem occurs. However, it has been discovered that there are various ways to solve this problem.

How to Fix the Windows 10 Error PAGE_FAULT_IN_NONPAGED_AREA

The remedies to the PAGE_FAULT_IN_NONPAGED_AREA error will be discussed in this post.



Solution 1: Start over with a new page file.

Windows uses your hard disc space to create Page File in order to speed up your system. You can solve this problem by turning off this page file. This is why:

Step 1: To open the Run Box, hold down the Windows key and the R key at the same time.
Step 2: Type “SystemPropertiesAdvanced.exe” into the run dialogue box and press the enter key.
Step 3: Click “Advanced” in the opened Windows and then “Settings” under the “Performance” category.
Step 4: Then, under “Advanced,” make sure the box for “Automatically manage paging file size for all drives” is unchecked.
Step 5: Choose “No page file” and click the set button, then double-check for any warning messages.
Step 6: Restart your machine after going through all of the upcoming windows by clicking OK.
Step 7: After restarting, go to “Virtual Memory” and repeat the procedures above.
Step 8: Select “System controlled size” from the drop-down menu and press the “set” button.
Step 9: This time, check the box next to “Automatically manage paging file size for all discs” and click OK to close any remaining windows.
Step 10: Restart your computer and see whether the problem still exists.

Solution 2: Run the chkdsk command.

Chkdsk is a disc inspection application for Windows that is used to rectify problems and search for files. This is why:

Step 1: Go to the start menu and type “cmd” in the search box.
Step 2: Right-click cmd and choose “Run As Administrator” from the menu.
Step 3: To run it, type “chkdsk /f /r” and hit enter.
Step 4: If a notice occurs that says “The drive is locked and if you want to plan a chkdsk on the next restart, punch in Y for yes,” type Y and press Enter.
Step 5: Restart your computer and wait for it to finish, as it will automatically detect and rectify any faults. Check to see whether the issue still exists. If you’re still having trouble, continue reading for more solutions.

Solution 3: Run System Restore

To use this method, you must:

Step 1: To enter the run dialogue box, press the Windows logo key and F at the same time.
Step 2: There, type “rstrui.exe” and hit the enter key.
Step 3: The default option will be “Recommended Restore.”
Step 4: To complete system restore, click next, then finish. Follow the on-screen directions to complete the process.

Solution 4: Update Windows

Make sure your PC is up to date to avoid this problem.

Users of Windows 7 and 8 should do the following:

Go to the search bar and type “check for updates” in the box. Make sure to install any updates that are available.

For users of Windows 10:

Press Windows key+R at the same time to open the Run dialogue box, then type “ms-settings:windowsupdate” and press the Enter key. Now it’s time to check for updates and install them.

Solution 5: Driver Interference

This issue can arise if a Driver causes Interference, therefore make sure there aren’t any, and use the methods below to check the Driver Verifier:

Step 1: With this type verifier, press the Windows key.
Step 2: To run it, select “verifier.exe” from the search results.
Step 3: The Driver Verifier Manager will now appear in a new window, and you must select Create customs settings.
Step 4: Except for the selections “Randomized Low Resource Simulation,” “Concurrency stress test,” and “DDI compliance checking,”DDI Compliance Checking Additional,” click next and then check the box for all of the things.
Step 5: Then select the next option, which is “Select driver names from a list.” Select all drivers that are not provided by Microsoft and then click Next. The system will then be finished and restarted.
Step 6: After resuming, let it run until it encounters an error, then restart your system and press Windows key + E at the same time. Go to C drive, then Windows, and then Minidump from there.
Step 7: You’ll find a log file there; open it and look for the driver that caused the error; alternatively, you can utilise to locate this file.
Following your discovery, Go to and type the name of the sys file in the search box.
Step 8: After the device has been recognised, press Windows key + R and type “devmgmt.msc” in the dialogue box to open Device Manager. If a UAC warning appears, select Yes.
Step 9: Locate the hardware in the device management and click it to update the driver software. If no updates are available there, go to the manufacturer’s official website to download the most recent version.
Step 10: After you’ve finished troubleshooting, you’ll need to turn off the “Driver Verifier Manager,” which you can do by going to Start and typing “verifier.”
Select “verifier.exe” from the search results.
Step 11: Under the “Device Verifier Manager” panel, select “remove existing settings” from the options.
Select the Finish button and confirm any upcoming messages before restarting your computer. Check to see whether the issue still exists.

Solution 6: Run a scan using SFC.

Though the SFC (System File Checker) check is designed for Windows 10, it may also be used on Windows 7 and 8. Follow these steps to run it:

Step 1: Select “Command Prompt (Admin)” from the start menu by right-clicking it.
Step 2: Type “sfc /scannow” into the command prompt and hit enter to run the command and resolve the issues.

Solution 7: Windows Memory Diagnostics

Because RAM is the primary component for paging, faults in RAM might cause such problems. This is why:

Step 1: To open the Run Box, press the Windows logo key + R together and type “mdsched.exe” into it.                                                                                                        Step 2: Enter the code using the enter key.
Step 3: A dialogue window will display once more, asking if you want to reboot and check RAM now or later. Choose the option that is most convenient for you!
Step 4: RAM checks will begin with a reboot; if no problems are found, your RAM is in good shape; nevertheless, if an error is found, identify it in your laptop or CPU and remove it from the system. Use a pencil eraser to wipe the golden bits, and a spare brush to clean the slot.

To test the RAM stick, insert each one one at a time and see if it causes any issues. Similarly, you can examine the state of a slot by utilising it one at a time. Check to see whether the issue still exists.


If both the slot and the RAM stick pass the test, the issue could be related to a malfunctioning motherboard. Send your computer or laptop in for a hardware diagnostic checkup. I hope you found this information useful. Please let us know which method worked best for you.

Leave a Reply